Gatling Muzzle Flash – 1 – Physical
Big weapons deserves big muzzles flashes!
Secure payment
Notice
If you need custom sizes or colors, please reach out to us via our contact form.
Planning a bulk order? We’re happy to offer special discounts for larger quantities.
This is a 3D-printed bit, and as with all 3D-printed items, it may contain minor support marks and subtle layer lines. Each piece is cleaned with alcohol and UV-cured to ensure durability and quality.
We’ve been 3D printing non-stop since 2018, and our items reflect that experience—high quality and ready to be painted.
For parts printed in clear resin and aiming for a translucent finish, we recommend applying a gloss varnish after painting.
If you purchase a piece printed in grey resin, please start with a base coat before applying other colors. Even opaque 3D printer resins can have a slight translucency.
If you have more questions, please, check our FAQ section below.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | S, Dunecrawler, M, L, XL |
Material: Clear resin
Size: Check “Additional Information” tab per size
Example “M” Size:
FAQs
Do you ship worldwide?
Yes, we do! We’re based in Spain and offer international shipping for all our physical products.
Are the 3D printed pieces cleaned and ready to use?
Yes! All our physical products are properly cleaned and prepared before shipping. Some pieces might have small remnants of 3D supports, but don’t worry—these are very easy to remove with minimal effort.
If your piece feels slightly tacky or sticky, simply leave it in sunlight for a few minutes to fully cure the resin.
You can paint the piece with or without priming, as the surface provides excellent paint adhesion either way.
Do the resin parts come painted or assembled?
No, all resin parts are delivered unpainted and unassembled (if applicable), ready for hobbyists to customize and paint according to their army’s colors and theme.
Only our Premium Edition products comes pre-painted by our team.
What material are the resin products made of?
Our physical effects and bits are cast in high-quality, durable resin, ideal for tabletop miniatures. Each piece is cleaned, cured, and quality-checked before shipping.
Details
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | S, Dunecrawler, M, L, XL |
Safety, Preparation and storage
SAFETY PRECAUTIONS
Deadly Print Studio’s resin bits are made from 3D-printed materials that could be harmful if swallowed. Exercise caution while handling the resin parts and avoid touching your mouth and eyes. After use, wash your hands thoroughly with mild soap and water.
These sets include small and sharp components and are intended for users aged 13 and above.
RESIN CHARACTERISTICS
The resin has a flexible, rubber-like feel, similar to an elastic band, and is particularly bendable in smaller, more delicate parts. Larger pieces with more surface area may have a slightly tacky texture.
Upon opening, the resin may release a strong odor, which will fade once exposed to air.
PREPARATION
The resin pieces come fully washed, cured, and mostly free of supports, making them nearly ready to paint as soon as you unpack them.
Carefully inspect the pieces for any small support remnants, which may appear as tiny sticks, often located over gaps. These can be easily removed with the tip of a hobby knife.
For best results, it’s recommended to prime the pieces before applying paint. Primers, paints, and varnishes all provide additional layers of protection.
STORAGE
To prevent resin degradation and increased brittleness, store the pieces in containers, away from direct sunlight.
More info about the resin: